uficell® topsonic acoustic impact sound insulation made from natural rubber for optimum room acoustics
Impact sound insulation of up to 22 dB(A) and walking noise reduction of up to 50 per cent, excellent acoustic performance, ideal for underfloor heating
- Density: 800 kg/m³
- Weight per unit area: 1.6 kg/m² at a thickness of 2 mm
- Weight per unit area: 2.7 kg/m² at a thickness of 3 mm
- Impact sound reduction of up to 50%
- Impact sound reduction of approx. 22 dB(A)
- Compressive strength up to 255 kPa
- Excellent for use with underfloor heating
- Natural product
€6.89* / sqm
% €79.90* (14% saved)Available, delivery time: 1-3 days - 438 Rollen available
; the best underlay for impact sound insulation and improving footfall noise
Product description:
Highly compressed, refined natural rubber, density: 800 kg/m³. Highly effective acoustic performance with excellent frequency response. This results in superior impact and footfall sound insulation values compared to other insulation underlays. The material’s exceptional density, durability, elasticity and long-term compression stability allow for a wide range of applications. When purchased with aluminium lamination, no additional vapour barrier is required.
Applications:
Where the highest standards are required in terms of quality, impact and footfall sound insulation, indoor comfort and load-bearing capacity. The ideal underlay for high-quality, floating hard floor coverings with underfloor heating (e.g. parquet or laminate flooring). Possesses outstanding material properties, such as those required in commercial applications. Maximum efficiency with hot-water underfloor heating – thermal resistance of just 0.01 m² K/W.
Technical data:
- Impact sound insulation approx. 22 dB(A)
- Impact sound reduction 38–50%
- Thermal resistance: 0.010 m² K/W
- Compressive strength (CS): 255 kPa
- Density: approx. 800 kg/m³
Recommended accessories:
uficell® ALU joint sealing tape – for bonding the joints
Installation:
Thanks to its elasticity and high weight per unit area, Topsonic Akustik is quick and easy to lay. Before laying, ensure that the screed or subfloor is level, clean, dry, free from cracks, and resistant to tension and compression. Topsonic Akustik is rolled out onto the floor, with the individual strips laid end-to-end (for Topsonic Akustik Alu, the aluminium side must face upwards). For Topsonic Akustik Alu, the edges should now be sealed with our aluminium joint sealing tape to ensure full-surface protection against moisture.
Technical data

Applications

| Compressive strength (CS): | 255 kPa |
|---|---|
| Fire behaviour (RTF): | E |
| Impact sound insulation: | 22 dB |
| Manufacturer: | uficell |
| Material: | Rubber |
| Noise reduction: | 50 % |
| Spatial density (QW): | 800 kg/m³ |
| Colour: | beige/green/charcoal grey |
| Strength: | 3 mm |
| Underfloor heating: | Yes | Hot water |
| Thermal resistance (m² K/W): | 0.010 |
| Quality: | 1st choice |
Login