Die Dampfsperre: Effektiver Schutz gegen aufsteigende Feuchtigkeit
If laminate flooring is exposed to rising damp over a long period, it will swell and suffer irreparable damage. A vapour barrier can effectively protect your floor from such damage. Even when using underfloor heating, a vapour barrier film should be installed beneath the impact sound insulation. We only supply tested, high-quality films that comply with the GKV standard.
± 5% tolerance, tested in accordance with GKV specifications; required when using underfloor heating or in areas in contact with the ground (e.g. basements).
Content: 25 sqm (€17.25*)
Available, delivery time: 1-3 days - 938 Rollen available
Extremely hard-wearing covering material weighing 320 g/m² – waterproof LDPE coating | cost-effective covering for large areas and paths
Content: 75 sqm (€66.75*)
Available, delivery time: 1-3 days - 286 Rollen available
± 5% tolerance, tested in accordance with GKV specifications; required when using underfloor heating or in areas in contact with the ground (e.g. basements).
Content: 25 sqm (€19.75*)
Available, delivery time: 1-3 days - 752 Rollen available
± 5% tolerance, tested in accordance with GKV specifications, extremely airtight (sd > 100 m) in accordance with EN 1931, fire resistance class; available in widths of 200 and 400 cm
Content: 50 sqm (€49.50*)
Available, delivery time: 1-3 days - 641 Rollen available
The perfect surface protection for floor coverings: PREMIUM protective fleece. Roll size: 25 m², weight: 180 g/m²
Content: 25 sqm (€24.75*)
Available, delivery time: 1-3 days - 2305 Rollen available
The perfect surface protection for floor coverings: PREMIUM protective fleece. Roll size: 25 m², weight: 220 g/m²
Content: 25 sqm (€29.75*)
Available, delivery time: 1-3 days - 2375 Rollen available
The perfect surface protection for floor coverings: PREMIUM protective fleece. Roll size: 25 m², weight: 250 g/m²
Content: 25 sqm (€32.25*)
Available, delivery time: 1-3 days - 2342 Rollen available
Extremely hard-wearing covering material weighing 220 g/m² – waterproof LDPE coating | a cost-effective way to cover large areas and paths
Content: 75 sqm (€59.25*)
Available, delivery time: 1-3 days - 210 Rollen available
Adhesive tape for joining overlaps between vapour barrier membranes and OSB boards; water-repellent; 60 mm wide; 40 running metres per roll; professional-grade quality in accordance with DIN 4108-7 and EnEV!
Content: 1 Rollen
Available, delivery time: 1-3 days - 487 Rollen available
Premium protective fleece, which adheres of its own accord to all dry surfaces. The perfect surface protection for floor coverings and stairs – reusable. Roll size: 50 m², weight: 160 g/m²
Content: 50 sqm (€79.50*)
Available, delivery time: 1-3 days - 1369 Rollen available
Professional-grade building membranes & vapour barriers
The vapour barrier: effective protection against rising damp
If laminate flooring is constantly exposed to rising damp, it will swell and suffer irreparable damage. A vapour barrier effectively protects your floor from such damage.
What exactly is a vapour barrier?
Vapour barriers – also known as vapour retarders – are thin PE films, 0.10–0.20 mm thick, which are laid underneath the laminate flooring. Vapour barriers are available in various sizes. A 4 x 4 m sheet may be sufficient to cover an entire room in one go. However, 2 m wide rolls are also available, for example, comprising strips up to 50 m long, which are laid side by side.
Why are vapour barriers necessary?
Laminate flooring consists largely of wood. And wood reacts to moisture: it can warp or swell. Consequently, laminate flooring cannot tolerate prolonged exposure to moisture. A vapour barrier eliminates precisely this risk. It prevents moisture from rising up from the subfloor, penetrating the laminate and causing damage.
Are vapour barriers only necessary for certain subfloors?
You should use a vapour barrier particularly with mineral subfloors, such as concrete and screed, as these surfaces release moisture. However, even with subfloors that appear dry at first glance, such a membrane is often advisable. On ground floors, for example, the moisture content often fluctuates between the seasons. So, whilst you may think the subfloor is dry in summer, the situation may be quite different in winter.
A vapour barrier is absolutely
essential in heated rooms above cellars. Condensation quickly forms on the ceiling above an unheated cellar and finds its way upwards towards the laminate flooring.
How is a vapour barrier installed?
Before you start laying the membrane, we recommend that you read the article on ‘Suitable subfloors for laminate flooring’, as you may need to obtain a residual moisture report beforehand.
The vapour barrier is laid on a clean, dry floor.
Start in a corner of the room and lay out the membrane over a large area.
As moisture can also penetrate the laminate via the walls, leave the vapour barrier standing up 4–8 cm along the walls all round. At the corners of the room, you can cut the membrane and overlap or fold it. Skirting boards will cover the membrane later.
The strips are easier to lay if you secure the membrane to the wall with fabric-backed adhesive tape to prevent it from slipping. If you are laying several strips, lay them so that they overlap slightly and tape them together. If not taped, the strips should overlap by at least 20 cm.
Where there are transition profiles on door frames or expansion joints, lay the vapour barrier continuously. You can then simply fix the profile onto it using screws.
How do I combine a vapour barrier with impact sound insulation?
Conveniently, there are impact sound insulation products that have a vapour barrier already integrated. Whilst this usually doesn’t save you any money, it does save you a great deal of effort, as you can complete two tasks in a single step.
If you are not using a combined product, the next step is to lay the impact sound insulation before installing the laminate flooring.
Professional-grade building membranes & vapour barriers
The vapour barrier: effective protection against rising damp
If laminate flooring is constantly exposed to rising damp, it will swell and suffer irreparable damage. A vapour barrier effectively protects your floor from such damage.
What exactly is a vapour barrier?
Vapour barriers – also known as vapour retarders – are thin PE films, 0.10–0.20 mm thick, which are laid underneath the laminate flooring. Vapour barriers are available in various sizes. A 4 x 4 m sheet may be sufficient to cover an entire room in one go. However, 2 m wide rolls are also available, for example, comprising strips up to 50 m long, which are laid side by side.
Why are vapour barriers necessary?
Laminate flooring consists largely of wood. And wood reacts to moisture: it can warp or swell. Consequently, laminate flooring cannot tolerate prolonged exposure to moisture. A vapour barrier eliminates precisely this risk. It prevents moisture from rising up from the subfloor, penetrating the laminate and causing damage.
Are vapour barriers only necessary for certain subfloors?
You should use a vapour barrier particularly with mineral subfloors, such as concrete and screed, as these surfaces release moisture. However, even with subfloors that appear dry at first glance, such a membrane is often advisable. On ground floors, for example, the moisture content often fluctuates between the seasons. So, whilst you may think the subfloor is dry in summer, the situation may be quite different in winter.
A vapour barrier is absolutely
essential in heated rooms above cellars. Condensation quickly forms on the ceiling above an unheated cellar and finds its way upwards towards the laminate flooring.
How is a vapour barrier installed?
Before you start laying the membrane, we recommend that you read the article on ‘Suitable subfloors for laminate flooring’, as you may need to obtain a residual moisture report beforehand.
The vapour barrier is laid on a clean, dry floor.
Start in a corner of the room and lay out the membrane over a large area.
As moisture can also penetrate the laminate via the walls, leave the vapour barrier standing up 4–8 cm along the walls all round. At the corners of the room, you can cut the membrane and overlap or fold it. Skirting boards will cover the membrane later.
The strips are easier to lay if you secure the membrane to the wall with fabric-backed adhesive tape to prevent it from slipping. If you are laying several strips, lay them so that they overlap slightly and tape them together. If not taped, the strips should overlap by at least 20 cm.
Where there are transition profiles on door frames or expansion joints, lay the vapour barrier continuously. You can then simply fix the profile onto it using screws.
How do I combine a vapour barrier with impact sound insulation?
Conveniently, there are impact sound insulation products that have a vapour barrier already integrated. Whilst this usually doesn’t save you any money, it does save you a great deal of effort, as you can complete two tasks in a single step.
If you are not using a combined product, the next step is to lay the impact sound insulation before installing the laminate flooring.